Thermal conductivity and overall cooling performance
Learn why a high W/(m·K) value is not enough on its own, and how contact, heat dissipation, and air-side resistance play a critical role.
<svg aria-label="Thermal conductivity and overall cooling performance — schematic technical drawing" class="kb-diagram" role="img" viewbox="0 0 640 250" xmlns="http://www.w3.org/2000/svg"><rect fill="#f3f7f8" height="250" rx="10" width="640"></rect><g fill="none" stroke="#26798a" stroke-linecap="round" stroke-linejoin="round" stroke-width="2.4"><rect fill="#deebee" height="70" rx="4" width="100" x="95" y="85"></rect><rect fill="#fbe8dd" height="25" rx="4" width="45" x="270" y="108"></rect><rect fill="#deebee" height="120" rx="4" width="135" x="390" y="60"></rect><path d="M195 120h75m45 0h75M525 120h45m-8-7 8 7-8 7"></path><text class="kb-label" x="145" y="187">Material</text><text class="kb-label" x="293" y="187">Contact</text><text class="kb-label" x="458" y="205">Heat transfer to ambient</text><text class="kb-label" x="320" y="228">The largest contributions determine total resistance</text></g></svg>
Conductivity is a property of the material, while resistance is a property of the heat path.
Thermal conductivity, expressed in W/(m·K), describes how a material conducts heat. Thermal resistance, expressed in K/W, describes a heat path under specific geometry and boundary conditions. Using one in place of the other leads to incorrect choices. You cannot calculate the temperature of a finished heatsink without knowing the thickness, surface area, heat source distribution, and connections, in addition to the material properties.
Which part accounts for the largest share?
In a simplified series model, total resistance can consist of contributions from the component, contact, base, and transfer to the environment. Real-world designs also include parallel heat paths. As a first step, measure where the largest temperature difference occurs between two points. If the base is at nearly the same temperature but there is a large difference at the air interface, increasing only the base conductivity may have a limited effect.
A simple calculation shows why
In a hypothetical series path, let the internal material resistance be 0.2 K/W and the sum of other contributions be 1.8 K/W, for a total of 2 K/W. Halving the internal material contribution results in a total of 1.9 K/W—an improvement of 5%. At a 20 W heat load, the temperature rise becomes 38 K instead of 40 K. This is not a product promise, but an illustration of the importance of the share in total resistance.
Compare geometry and contact improvements as well
Better surface contact, the correct interface thickness, appropriate fin spacing, or reducing air leakage target different bottlenecks. Making every change at once makes it unclear which intervention is working. Change one variable at a time and measure under the same power, ambient, and mounting conditions. Then, combine the necessary improvements to re-verify the final design.
Base material selection on a measurable rationale
Solutions containing copper, ceramic, graphite, or diamond may make sense for a specific heat path. An aluminum profile can also meet the required target with the right geometry and mounting. When evaluating Arma's profile options, recording which cross-section and length achieve the target temperature is more useful than deciding based on the material name alone. The final line of your comparison should include mass, production, and assembly repeatability alongside temperature.
Quick checklist
- Distinguish between W/(m·K) and K/W values.
- Identify the dominant contribution to total resistance through measurement.
- Compare material changes with geometry and mounting improvements under identical conditions.
Frequently asked questions
Does doubling the conductivity halve the temperature rise?
For the thermal resistance of an ideal layer alone, such a relationship can be established if all other conditions remain the same. It is not a general rule for the temperature rise of an entire system.
View related profiles · Request technical support
Use consistent units in conduction calculations
For a one-dimensional steady layer with constant conductivity, heat flow is approximately Q̇ = k × A × ΔT / L. Q̇ is heat power (W), k is material conductivity (W/(m·K)), A is the area perpendicular to heat flow (m²), L is thickness in the flow direction (m), and ΔT is the temperature difference (K). The layer conduction resistance is R = L/(k × A), in K/W.
Increasing area does not change the material conductivity k; it reduces conduction resistance when other conditions are fixed. Increasing thickness does not increase k; it increases resistance in this model. Alloy, temperature and material data must be verified before assigning a conductivity value to an aluminum profile.