Surface-mounted, recessed and trimless LED profiles
Make your installation decision based on aesthetics, infrastructure preparation, and maintenance access.
<svg xmlns="http://www.w3.org/2000/svg" class="kb-diagram" viewBox="0 0 640 250" role="img" aria-label="Surface-mounted, recessed and trimless LED profiles — schematic technical drawing"><rect width="640" height="250" rx="10" fill="#f3f7f8"/><g fill="none" stroke="#26798a" stroke-width="3" stroke-linecap="round" stroke-linejoin="round"><path d="M70 170h120V95h-15v60H85V95H70zM260 125h120v45H260zM250 125h-35m165 0h35M450 115h120v55H450zM430 115h20m120 0h20" fill="#deebee"/><path d="M70 90h120M260 120h120M450 110h120" stroke="#ba653d"/><path d="M50 175h160M230 130h30m120 0h30M420 120h30m120 0h30"/></g></svg>
Surface-mounted
The profile is applied to an existing surface. Sufficient space must be left for clips, screws, cable outlets, and end caps. The flatness of the surface and load-bearing conditions are incorporated into the installation design.
Recessed application
The profile is placed inside a channel or cavity. Visible edges, the dimensions of the routed slot, and installation tolerances must be determined according to the cross-section. The total external dimensions of the product should not be considered the same as the required installation clearance.
Trimless application
The profile's mounting flanges are designed to integrate with the surface finish. Drywall and cladding details should be coordinated at an early stage of the project. The sequence for painting, plastering, and installing the diffuser is planned according to the product's installation instructions.
Checklist before deciding
- Surface material and installation clearance
- LED strip, cable, and driver access
- Corners, joints, and end caps
- Removable parts for maintenance